PLCs Y CONTROLADORES · SIEMENS

7ML1301-1AA11-1XX0-Z,Y01=100CM,XX= 3/4"

7ML1301-1AA21-1XX0-Z,Y01=120CM,XX=3/4" G

7ML1301-1AA21-1XX0-Z,Y01=140CM,X=3/4"G

7ML1301-1AA21-1XX0-Z,Y01=180CM,X=3/4"G

7ML1301-1AA21-1XX0-Z, Y-1=200CM,X=3/4"G THREAD SITRANS LG200 COAXIAL PROBES ARE USED IN MOST STANDARD APPLICATIONS. COAXIAL PROBES YIELD ROBUST SIGNAL STRENGTH EVEN IN EXTREMELY LOW DIELECTRIC APPLICATIONS (DK 1.4 TO 100).

7ML1301-1AA31-1XX0-Z,Y01=230CM,XX=3/4" G

7ML1301-1AA31-1XX0-Z, Y01=250CM,X=3/4"

VERIFICATION CELL FILLED WITH AIR FOR NON-O2 APPLICATIONS

7ML5411XJD001DF0,X=316L WITH PEEK ANTENNA VERSION: STAINLESS STEEL 316L WITH PEEK EMITTER FLANGE DESIGN: 6" ASME, 300LB, RAISED FACE COMMUNICATION/OUTPUT: 4-20 MA, HART, MODBUS PROCESS SEAL: FKM ENCLOSURE: ALUMINUM, EPOXY PAINT, 2X1/2" NPT HORN SIZE/

7ML5411XJD001KF0,X=316L WITH PEEK

7ML5411XKD001EF0,X=316L WITH PEEK

7ML5411XKD001PF0,X=316L WITH PEEK

7ML5411XYY001DJ0,X=316L WITH PEEK

7ML5411XYY001KJ0,X=316L WITH PEEK

7ML5411XYY001EJ0,X=316L WITH PEEK

7ML5411XYY001PJ0,X=316L WITH PEEK ANTENNA VERSION: STAINLESS STEEL 316L WITH PEEK EMITTER FLANGE DESIGN: YY = DN200 PN25, TYPE A FLAT FACED COMMUNICATION/OUTPUT: 4-20 MA, HART, MODBUS PROCESS SEAL: FKM ENCLOSURE: ALUMINUM, EPOXY PAINT, 2XM20X1.5 HORN

FUE080 TRANSMITTER 115-230VAC SUPPLY

7ML56021XX141AA0Z,XX=2" 900LB ELECTRONIC TRANSMITTER: MSP2002-1 (330 PF) PROCESS CONNECTION: 2" ASME, 900LB PROBE INSULATION/MATERIAL OF PROCESS CONNECTION: PFA INSULATION/316L STAINLESS STEEL APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6...T1 PROBE/EL

7ML56021XX141AA0Z,XX=3" 900LB

7ML13031XYY13ZZ0;Y01=200CM,=HAST.C22

QUICK START FOR CLS/LC500 TRANSLATED TO PORTUGUESE

LC500,7ML55152AXX11AA1-2" SAN-Y-01-2200 PROBE ROD: 16 MM, PFA INSULATED, PROCESS CONNECTION: 2" SANITARY TRI CLAMP APPROVALS: GENERAL PURPOSE ENCLOSURE 2 1/2" NPT IP68 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF)

7ML13012AE223XX0,XX=DN50 PN16 RF,134CM

7ML13011AA311XX0,X=DN50 PN16 RF,214CM MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH 214CM O-RINGS: VITON PROCESS CONNECTION: DN50 PN16,RAISED FACE FLANGE C12: ACCEPTANCE TEST