PLCs Y CONTROLADORES

LC500,7ML55152AXX11AA1-2" SAN-Y-01-2200 PROBE ROD: 16 MM, PFA INSULATED, PROCESS CONNECTION: 2" SANITARY TRI CLAMP APPROVALS: GENERAL PURPOSE ENCLOSURE 2 1/2" NPT IP68 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF)

7ML13012AE223XX0,XX=DN50 PN16 RF,134CM

7ML13011AA311XX0,X=DN50 PN16 RF,214CM MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH 214CM O-RINGS: VITON PROCESS CONNECTION: DN50 PN16,RAISED FACE FLANGE C12: ACCEPTANCE TEST

7ML13012AA223DD0,135CM,LIQUID PENETRANT

7ML13012AA223DD0,195CM,LIQUID PENETRANT

7ML13012AE223XX0,XX=DN50 PN16 RF,195CM

7ML56031AB141AA0-Z,CRYO,HELIUM CRYO,SLOTTED STILLING WELL Y01=800MM,Y02=200MM +Y15+C11+C12 ROD,16 MM(0.63"), PFA INSULATED WITH 35 MM (1.34") STILLING WELL PROCESS CONNECTION: 2",ASME,300 IB APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE

7ML5650XXE000DBX,2"BSPT,Y02-50MM

7ML54251EA003EA1 WITH PFA COATING PFA COATING ON DN200 PN16 FLANGE, HUBS, 200MM HORN PURGED OPTION WITH NO PRESSURE RATING (0.5BAR MAX)

7ML5625XXF011AA1-Z,Y01=12000

7ML1301XAE323EC0-Z, INTERFACE,Y01=300CM

7ML56506FC000DDX-Y02-500 PROCESS CONNECTION: WELDED FLANGE,316L, TYPE A FLAT FACED DN 50, PN 40 PROBE LENGTH: EXTENDED ROD, LENGTH 750 MM (29.53") THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL: 316L STAINLESS STEEL WITH

7ML54110GB003XJ0-Z,C12,Y15,=1220MM WAVEGUIDE ANTENNA MATERIAL: PTFE PROCESS CONNECTION: 3" 150LB ASME FF EXTENSIONS: WAVEGUIDE ONLY, 1220MM PROCESS SEAL: FKM ENCLOSURE / CABLE INLET: 316L SS ENCLOSURE / M20 COMMUNICATION: HART, MODBUS APPROVALS: AT

7ML54110GB003XJ0-Z,C12,Y15,=880MM WAVEGUIDE ANTENNA MATERIAL: PTFE PROCESS CONNECTION: 3" 150LB ASME FF EXTENSIONS: WAVEGUIDE ONLY, 880MM PROCESS SEAL: FKM ENCLOSURE / CABLE INLET: 316L SS ENCLOSURE / M20 COMMUNICATION: HART, MODBUS APPROVALS: ATEX

7ML1301-3AXX2-3GD0-Z;X=40CM,Y01=40CM

7ML56601DX000CB0-Y01,1500 PROCESS CONNECTION: R 1-1/2" ((BSPT), EN 10226/PT (JIS-T), PROBE LENGTH EXTENDED ROD, LENGTH 1500 MM THERMAL ISOLATOR:WITHOUT WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS

7ML56601DX000CB0-Y01,2000 PROCESS CONNECTION R 1-1/2" ((BSPT), EN 10226/PT PROBE LENGTH: EXTENDED ROD, LENGTH 2000 MM THERMAL ISOLATOR: WITHOUT WETTED SEALS FKM PROBE MATERIAL: 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS:IS,CE

CHOPPER (CO2) FOR ULTRAMAT 6E

CHOPPER FOR ULTRAMAT 6 ALL EXCEPT CO2 FOR U6E

7ML5431XXX201XAX,HART SU<3.6MA,M20,AP-A LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION A, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX201XCX,HART SU<3.6MA,M20 LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION C, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX201XEX,HART SU<3.6MA,M20,AP-E LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION E, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX201XFX,HART SU<(><<)>3.6MA,M20,AP-F LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION F, WITH HART (<(><<)>3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX201XGX,HART SU<3.6MA,M20,AP-G LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION G, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION