PLCs Y CONTROLADORES

7ML5735-1AB11-0AA0;Y01=195 MM INPUT VOLTAGE: DPDT RELAY - 19 TO 253 V AC, 19 TO 55 V DC PROCESS TEMPERATURE UP TO 150 C (+302 F) PROCESS CONNECTION:1 1/4" NPT ((TAPER), ANSI/ASME B1.20.1) EXTENSION LENGTH STAINLESS STEEL 316TI (1.4571) APPROVALS CSA/

7ML5650-3BA10-0HB0; Y01=350; Y02=250MM PROCESS CONNECTION G 1" (BSPP) LENGTH (THREADED LENGTHS INCLUDE PROCESS THREAD.) STANDARD VERSION, ROD 350 MM (13.78") THERMAL ISOLATOR WITH TI WETTED SEALS FKM PROBE MATERIAL: 316L SS WITH PFA LINING AND PEEK I

INPUT-OUTPUT SPARE KIT, ADIO_I2C BD, 4 EACH AI/AO/DI/DO

INPUT-OUTPUT SPARE KIT, AIO_I2C BD, 8AO, 8AI, 2DI

INPUT-OUTPUT SPARE KIT, DIO_I2C BD, 8 DO, 6 DI

7ML13016AB312XX0,Y15,3000MM, DN100PN40 E MODEL: COAXIAL, INTERFACE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: 300CM O-RINGS: EPDM (ETHYLENE PROPYLENE RUBBER) PROCESS CONNECTION (SIZE/TYPE)

7ML54310XX200DC0,Y15,DN100 PN40 1092-1 E PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPES: DN 100PN40 EN1092-1 TYPE E FACE COMMUNICATION 4-20MA HART, START-UP AT <3.6MA

7ML57472DXXX1BA2,DN150,PN25, TYPEA. ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...250 V AC/DC APPROVAL ATEX II 1/2G, 2G EEX D IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN150 PN25 TYPE A, EN 1092-1 / 316L ADAPTER/PROCESS TEMPERATURE WITHOUT

7ML57312BX142AA0,DN200, PN16,DIN 2632,FLAT FACED

7ML57313AX131BA0.DN50,PN16 POWER SUPPLY: 18 TO 50 V DC PNP PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION: FLANGED, DN100 PN 16, EN1092-1 (1.4541/321) EXTENSION LENGTH:Y01=520MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS

7ML57313AFXX1AA0,Y01-270MM

7ML56301AC200CB0, REMOTE MOUNT 2M PROCESS CONNECTION R 3/4 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH EXTENDED ROD, 350 MM (13.78) REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET REMOTE MOUNT ELECTRONICS WITH 2M(79)CABLE WETTED SEALS FKM P

7ML56311DC000JB0 WITH EXTRA PROCESS CONNECTION. PROCESS CONNECTION: R 1 1/2 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH: EXTENDED CABLE, 5000 MM THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR PROBE MATERIAL FKM AND PTFE APPROVALS FEP JACKETED C

7ML11062XA200A,80M PROCESS CONNECTION R 1" ((BSPT), EN 10226) CABLE LENGTH 80 M FACING STANDARD (CSM RUBBER) APPROVALS FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE (FLUSH MOUNT) NONE

7ML5631-1DAX0-0CB0;=2M RME PROCESS CONNECTION R 1 1/2" ((BSPT), EN 10226/PT(JIS-T), JIS B 0203) 3000 MM (118.11"), LENGTH CAN BE SHORTENED BY CUSTOMER REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET REMOTE MOUNT ELECTRONICS WITH 2 M (79") OF CABLE

7ML54231XX003CA1,X=DN125PN16 FF. ANTENNA MATERIAL ANTENNA ADAPTER: PTFE FLAT FACED FLANGES (316L STAINLESS STEEL)DN 125 PN 16, TYPE A, FLAT FACED ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH NONE PROCESS SEAL/GASKET INTEGRAL GASKET, FOR FF FLANGE

BELT,CNVR,PU,18X146,57PIW,2PLY

7ML54310XX201DA1,6 150 FF PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPE: 6 ASME, 150 LB, FLAT FACED COMMUNICATION: 4-20MA HART, START-UP AT <3.6MA ENCLOSURE (WITH CABL

7MH71021CXX0, FLOWGUIDE, E40 BASE, 4,XX=SPECIAL PAINT MODEL E-40 BASE MOUNT, 40 T/H MAX. DESIGN CAPACITY FLOWGUIDE SIZE 4 ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION: MILD STEEL, EPOXY PAINTED WITH ZINC PRIMER CABINET CONSTRUCTION: MILD STEEL, EPOXY P

7ML56401BA000LB0,W/O LOCTITE. PROCESS CONNECTION R 1 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) LENGTH: COMPACT (THREADED 120 MM THREAD.) (4.72), FLANGED 98 MM (3.86)) THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR WETTED SEALS FKM PROBE MATERIAL 316L ST

7ML56401BM000LB0-Z,WITHOUT LOCTITE,Y01=275MM. PROCESS CONNECTION R 1 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) LENGTH: (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, 210 TO 1000 MM (8.27 TO 39.37) THERMAL ISOLAT

7ML54310XX200CC0,Y15,DN80 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: DN 80 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT <

7ML54310XX200CC0,Y15,DN80 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L DN 80 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT <3.

7ML54310XX200DC0,Y15,DN100 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: DN 100 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT