PLCs Y CONTROLADORES

WD600,CUSTOM,7MH7185-6HA0, NO LOADCELLS BELT WIDTH 42" (1000MM) LOAD CELL CAPACITY NONE

KIT,SPARES,WFDR PBD-51038163

7ML54310XX200CC1,XX=3 150LB RAISED FACE PROCESS CONNECTION AND ANTENNA MATERIAL 316L(1.4435OR1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L 3 CLASS150 ASME B16.5,RAISED FACE COMMUNICATION 4-20MA HART, START-UP AT <3.6MA ENC

WW300 10" PULLEY BEARING, 4BOLT FLG,2-7/16

7ML5431XXX300XB,LR250, FF,NPT,CSA/FM IS LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION B, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX300XD,LR250, FF,NPT,CSA/FM LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION D, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX301XEX,LR250 ,FF,M20,ATEX 3G LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION E, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION

7ML56300AAX00HA,REMOTE, HIGH TEMP CABLE PROCESS CONNECTION THREADED, 316L STAINLESS STEEL, 3/4 NPT ((TAPER), ANSI/ASME B1.20.1) PROBE LENGTH COMPACT (THREADED 120 MM (4.72), FLANGED 98 MM (3.86)) REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET: 5M (197

7ML55133EF122AA1,C11,C12, NACE,PRES CERT CABLE, PFA INSULATED, WEIGHTED Y01-8000MM,Y02-350MM PROCESS CONNECTION 6, ASME, 150 IB APPROVALS: CSA/FM CLASS I, DIV. 2, GROUPS A, B, C, D T4; ATEX II 3G 2D EEXN A(IB)IIC T6 TO T4 T100 ENCLOSURE/CABLE INLET A

7MH75601XA01,X=10M SITRANS AS 100 ACOUSTIC SENSOR WITH 10M CABLE

GASKET SET, FOR DIAPHRAGM GAS SUPPLY PUMP KNF

7MH71100MAX1 SENSING HEAD W/ SPEC PAINT: MOUNTING: BASE RANGE(RANGE SPRING SIZE/LEAF SPRING THICKNESS /VISCOSITY OF DAMPING FLUID):C13/A3/5000 GASKETING: SILICONE COATING:PRIMER-CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEO

7ML56525GB000DCX, Y01-500,Y02-380 PROCESS CONNECTION WELDED FLANGE, 316L STAINLESS STEEL, RAISED FACE,2 ASME, 150 LB PROBE LENGTH EXTENDED ROD, LENGTH 500 MM (19.69) WETTED SEALS GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS AP

7ML52212AA11,Y15, CERTIFICATES ENCLOSURE / CABLE INLET: PLASTIC (PBT), 2 1/2" NPT (NO CABLE GLANDS SUPPLIED) RANGE/TRANSDUCER MATERIAL: 6 METER (20 FT), ETFE PROCESS CONNECTION: 2" NPT ((TAPER), ANSI/ASME B1.20.1) COMMUNICATION / OUTPUT: 4-20 MA, H

PULLEY,BEND,24X4.5 DIA, W/SS GREASE FTNGS FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY ESTIMATE PREVIOUSLY PROVIDED BY THE CEG TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER.

AS100,7MH75601XA03,X=10M CABLE SENSOR STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH=10M SENSOR MOUNTING NONE APPROVALS FM/CSA CLASS II DIV. 1, GROUPS E, F AND G, COMES WITH 1/2 NPT FEMALE ADAPTOR

BELT,87-1/2X12-1/2,HI-TEMP, FDA,WW100

7ML56615NA100HBX,150LB RF FLANGE, = Y02 = 500MM WELDED FLANGE, 316L STAINLESS STEEL,RAISED FACE 4ASME,150LB LENGTH: EXTENDED CABLE, 3000 MM (118.11) THERMAL ISOLATOR WITH THERMAL ISOLATOR (FOR PROCESS CONNECTION TEMPERATURES OVER +85C (+185F)) WE

7ML13012XE223CA0,X=MONEL, MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: MONEL ADD ORDER CODE Y01 AND PLAIN TEXT: "INSERTION LENGTH CM" Y01=TBD O-RINGS NONE PROCESS CONNECTION: (SIZE/TYPE) 1-1/2" 300 LB ASME RAISED FACE FLANG

A5E03835763D

7ML54311CAX13CA0,Y15,=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIV

7ML54311CAX13CE0,Y15,=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIV

7ML54311CAX13CG0,Y15,=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIV

7ML57471AB261AB0-Z, Y01, Y17, Y01=250MM, Y17=LSA-4014, LSA-4016 ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...250 V AC/DC APPROVAL WITHOUT APPROVALS PROCESS CONNECTION / MATERIAL FLANGE DN125 PN40 FORM C, DIN 2501 / ECTFE Y01=250MM Y17 = LSA 4014 A