PLCs Y CONTROLADORES

PBD-25542-_X060,=1" DIA, MS APPROXIMATE WEIGHT OF TEST WEIGHT IS 13.1 KG TO SUIT STANDARD MWL 7MH7218-XBN00-1

7ML57303FF121RB4-Z,Y01=400MM PROCESS TEMPERATURE UP TO +250 C (+482 F) POWER SUPPLY 115 V AC, 1 REV/MIN., FAIL-SAFE PROCESS CONNECTION FLANGED, DN100PN6,EN1092-1(1.4541/321) PROCESS PRESSURE UP TO 0.5 BAR (7.25 PSI) PROCESS CONNECTION MATERIAL STAINL

7ML57471AXXX1AB0-Z,Y01=300MM DN125,PN16,FORM C, DIN 2501 RIGID EXTENSION RIGID EXTENDED VIBRATING LEVEL SWITCH FOR USE IN LIQUIDS AND LIQUID HAZARDOUS ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...50 V AC/DC APPROVAL: WITHOUT APPROVALS PROCESS CONN

7ML57472AXXX1AB0-Z,Y01=300MM DN125,PN16,FORM C, DIN 2501 RIGID EXTENSION RIGID EXTENDED VIBRATING LEVEL SWITCH FOR USE IN LIQUIDS AND LIQUID HAZARDOUS ELECTRONICS: DOUBLE RELAY (DPDT) 20...72 V DC/20...250 V AC (3A) APPROVAL:WITHOUT APPROVALS PROCESS

LVS200; 7ML57311AB121CA0, Y01= 450MM

LG200,CARBON STEEL CHAMBER, NACE,2"150LB MATERIAL OF CONSTRUCTION: CARBON STEEL BUILT TO NACE MR-01-75 PROCESS CONNECTION: 1-1/2" 150LB RF FLANGES PROBE LENGTH:210CM (82.68") CENTER TO CENTER DISTANCE: 210CM (82.68") EXTRA: 1/2" 150LB RF FLANGED VENT

LG200,CARBON STEEL CHAMBER, NACE,2"150LB MATERIAL OF CONSTRUCTION: CARBON STEEL BUILT TO NACE MR-01-75 PROCESS CONNECTION: 1-1/2" 150LB RF FLANGES PROCESS CONNECTION: 100CM (39.37") CENTER TO CENTER DISTANCE: 100CM (39.37") 1/2" 150LB RF FLANGED VENT

7ML56606EX00XCB0,LC300 PROBE PROCESS CONNECTION DN 50, PN 16,WELDED FLANGE, 316L STAINLESS STEEL, TYPE A FLAT FACED PROBE LENGTH Y01-250 THERMAL ISOLATOR WITHOUT WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS

7ML56606EX00XCB0,LC300 PROBE PROCESS CONNECTION DN 50, PN 16,WELDED FLANGE, 316L STAINLESS STEEL, TYPE A FLAT FACED PROBE LENGTH Y01-225 THERMAL ISOLATOR WITHOUT WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS

7ML56606EX00XCB0,LC300 PROBE PROCESS CONNECTION DN 50, PN 16,WELDED FLANGE, 316L STAINLESS STEEL, TYPE A FLAT FACED PROBE LENGTH Y01-450 THERMAL ISOLATOR WITHOUT WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS

7ML56606EX00XCB0,LC300 PROBE PROCESS CONNECTION DN 50, PN 16,WELDED FLANGE, 316L STAINLESS STEEL, TYPE A FLAT FACED PROBE LENGTH Y01-300MM THERMAL ISOLATOR WITHOUT WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATOR

7ML57474CC511XA0,C12,C15,Y17, Y01=80MM,X=SS HOUSING/M20X1.5 RIGID EXTENDED VIBRATING LEVEL SWITCH FOR USE IN LIQUIDS AND LIQUID HAZAARDOUS ELECTRONICS:NAMUR SIGNAL APPROVAL:ATEX II 1G, 1/2G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL

BELT,CNVR,SBR,24X310,57PIW, 2PLY,FDA,BFLG

MSI,7MH7122-1CT41-1C-Z+ C11+Y15,Z=5MCABLE SCALE CONSTRUCTION STANDARD DUTY BELT WIDTH AND 'A' DIMENSION 77 INCH, 'A' = 86 INCH (2184 MM) LOAD CELL CAPACITY 500 LB (226.8 KG) STAINLESS STEEL LOAD CELL W/ 5M CABLE LENGTH FABRICATION POLYESTER PAINTED M

LR260 ENCLOSURE WITH BOARD STACK, PROFIBUS COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION F, NO PROCESS CONNECTION

7ML54310XX200YG1,X=4"150LB RF,Y=150MM EXTENSION PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404)STAINLESS STEEL,PTFE EMITTER,FKM SEAL. PROCESS CONNECTION TYPE: 4" CLASS 150 ASME B16.5, RAISED FACED.COMMUNICATION: 4-20MA HART,START-U

7ML54310XX200YG1,X=4"150LB RF,Y=200MM EXTENSION PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404)STAINLESS STEEL,PTFE EMITTER,FKM SEAL. PROCESS CONNECTION TYPE: 4" CLASS 150 ASME B16.5, RAISED FACED.COMMUNICATION: 4-20MA HART,START-U

ANALYTIC MODULE A02 REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY (THIS MODULE NEEDS THE RETURN OF A DEFECT MODULE TO THE SUPPLY SITE)

ANALYTIC MODULE A03 REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY (THIS MODULE NEEDS THE RETURN OF A DEFECT MODULE TO THE SUPPLY SITE)

ANALYTIC MODULE A06 REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY (THIS MODULE NEEDS THE RETURN OF A DEFECT MODULE TO THE SUPPLY SITE)

ANALYTIC MODULE A08 REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY (THIS MODULE NEEDS THE RETURN OF A DEFECT MODULE TO THE SUPPLY SITE)

7ML57472DXXX3BA0,Y17, Y01=400MM,XX=3" 900LB RF LVL200, RIGID EXTENSION RIGID EXTENDED VIBRATING LEVEL SWITCH FOR USE IN LIQUIDS AND LIQUID HAZARDOUS ELECTRONICS:DOUBLE RELAY(DPDT) 20...72 VDC/20...250 VAC (3A) APPROVAL:ATEX II 1/2G, 2G EEX D IIC T6

SPARE ANALYTICAL MODULE TYPE D02_VUV REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY (THIS MODULE NEEDS THE RETURN OF A DEFECT MODULE TO THE SUPPLY SITE)

SPARE ANALYTICAL MODULE TYPE D03_VUV REFURBISHED TCD DETECTORS REPLACED COMPLETE TESTED ANALYTICALLY