SICAM

SICAM MCP TIMESYNC MODULE

SICAM DIGITAL INPUT, DI 32X DC 24V/60V

INPUT MODULE SICAM DI32 110-125VAC

SICAM RTU COMMAND OUTPUT CO32 32 1-WAY OUTP. OR 16 2-WAY OUT

SICAM RTU CONTROL RELEASE CR 8 INDICATIONS, 8 COMMANDS RELEA

INPUT MODULE 32POINT ANALOG SICAM RTU

SICAM RTU ANALOG INPUT AI-16 2-WAY RELAY MULTIPLEXER ANALOG

SICAM FSI: LED, NON-COMMUNICABLE

SICAM FSI: LED,COMMUNICABLE

DBC RELAY 110-250V DC SW-PARTNUMBER 51030000XXX ELEKTRONIC C

SICAM AK 3 MASTER CONTROL ELEMENT WITH: *2 ONBOARD ETHERNETD INTERFACES *UP TO 2 COMMUNICATION INTERFACES *COMMUNICATION WITH UP TO 16 PERIPHERAL ELEMENTS VIA THE SERIAL AX PERIPHERAL BUS *HUB FUNCTIONALITY FOR UP TO 16 ADDITIONAL PROCESSING- AND/OR

THE MODULE CP-2019 FOR SICAM AK 3 PROVIDES THE CARD CAGE THE NODE BUS AND THE SERIAL AX PERIPHERAL BUS. FOR OUTSIDE USE THE SERIAL AX PERIPHERAL BUS AND 1 SERIAL INTERFACE (HIGH- SPEED-LINK) ARE INTER- CONNECTABLE. NEXT TO TWO INTEGRATED ONBOARD ETH

THE POWER SUPPLY PS-2632 IS USED TO SUPPLY POWER TO THE SYSTEM COMPONENT SICAM AK 3. NOMINAL INPUT VOLTAGES (INPUT VOLTAGE RANGE): 110 VDC / 220 VDC (82,5 VDC TO 286 VDC) 115 VAC / 230 VAC (90 VAC TO 264 VAC) VOLTAGE OUTPUT FOR SYSTEM SUPPLY: 5.1VDC/

SICAM AK 3 RACK (44U WIDTH, 8U HEIGHT) WITH ROOM FOR 9 DOUBLE-EUROFORMAT MODULES, THEREOF * 1 MASTER CONTROL ELEMENT CP-2016 AND * UP TO 8 PROCESSING, COMMUNI- CATION, AND PERIPHERAL ELEMENTS * UP TO 2 POWER SUPPLIES PS-262X (IN CASE OF REDUNDANT POW

ACP 1703 CP-6014 MASTER CONTROL MODULE (MAT-NB. GC6-014)

ACP 1703 AI-6300 ANALOG INPUT 2X2 +/-20MA/ +/-10V (MAT-NB. G

SICAM A8000 CP-8000 24-60VDC -25 BIS +70 GRAD CELSIUS. COMPACT RTU

SICAM A8000 CP-8000 24-60VDC -40 BIS +70 GRAD CELSIUS. COMPA

POWER METER SICAM P50 BUILT-IN DEVICE FOR CONTROL PANELS 96 96MM WITH GRAPHIC DISPLAY STANDARD WITHOUT I/O MODULE FRONT PROTECTION CLASS: IP41 RS485 WITH PROFIBUS DP AND MODBUS RTU/ASCII

POWER METER SICAM P50 BUILT-IN DEVICE FOR CONTROL PANELS 96 96MM WITH GRAPHIC DISPLAY STANDARD WITHOUT I/O MODULE FRONT PROTECTION CLASS: IP41 RS485 WITH IEC 60870-5-103 AND MODBUS RTU/ASCII