PLCs Y CONTROLADORES

7ML5431XXX200XDX,HART SU<3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION D, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

7ML5431XXX200XHX,HART SU <3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION H, WITH HART (<3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION

CUSTOM E40 FLOWGUIDE, 8", MILD STEEL WITH SPECIAL PAINT

CUSTOM E40 FLOWGUIDE, 4", MILD STEEL WITH SPECIAL PAINT

7ML11062XA200A,X=35M PROCESS CONNECTION: R 1" (BSPT), EN 10226 CABLE LENGTH: = 35M FACING: STANDARD (CSM RUBBER) APPROVALS: FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUTING FLANGE (FLUSH MOUNT): NONE

7ML11062XA200A,X=80M PROCESS CONNECTION: R 1" (BSPT), EN 10226 CABLE LENGTH: = 80M FACING: STANDARD (CSM RUBBER) APPROVALS: FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUTING FLANGE (FLUSH MOUNT): NONE

7ML55170BC142BB1,CRYOGENIC VERSION: Y01 = 500MM, PFA INSULATED PROBE WITH 35MM STILLING WELL. Y02 = 50MM PROCESS CONNECTION (316L): 2", ASME, 150LB RAISED FACED SINGLE PIECE FLANGE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INL

7ML55170BC242BB1,CRYOGENIC VERSION: Y01 = 750MM, PFA INSULATED PROBE WITH 35MM STILLING WELL. Y02 = 50MM PROCESS CONNECTION (316L): 2", ASME, 300LB RAISED FACED SINGLE PIECE FLANGE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INL

SAMPLE GAS PATH COMPLETE (HASTELLOY C22)

MASS6000_TRANSMITTER _IP67_ASCO_LABEL

7ML5425XEA223EE1,C11,X=PEEK ANTENNA MATERIAL: 316L STAINLESS STEEL WITH PEEK CONE EMITTER PROCESS CONNECTION: DN 200 PN 16, TYPE A, FLAT FACED HORN / EXTENSION: 200 MM (8") HORN / NO EXTENSION PROCESS SEAL: FFKM DISPLAY / CABLE INLET: LUI / M20 COMMU

ABS. VALUE ENCODER ST 13 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SYNCHROFLANGE WITH HOOD AND PG RADIAL

ABS. VALUE ENCODER ST 13 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V STRIP FLANGE WITH HOOD AND RADIAL PG

ABSOLUTE ENCODER ST 13 BIT WITH PROFIBUS DP CLOCK SYNCHRONIZED OPERATING VOLTAGE 10-30 V WITH HOLLOW SHAFT 8-15 MM WITH COVER AND PG RADIAL

ABSOLUTE VALUE ENCODER 25 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SYNCHROFLANGE WITH HOOD AND PG RADIAL

ABS. VALUE ENCODER MT 27 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V CLAMP FLANGE WITH HOOD AND RADIAL PG

ABSOLUTE ENCODER MT 27 BIT WITH PROFIBUS DP CLOCK SYNCHRONIZED OPERATING VOLTAGE 10-30 V WITH HOLLOW SHAFT 8-15 MM WITH COVER AND PG RADIAL

ABSOLUTE ENCODER 25 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V CLAMPING FLANGE 65 MM SHAFT W. DRILLING FOR DOWEL PIN DOWEL PIN ENCLOSED WITH HOOD IN SPECIAL VERSION

ABS. VALUE ENCODER MT 27 BIT CLOCKED WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SUPPORTED FLANGE JOINT, SPECIAL VERSION WITH HOOD AND RADIAL SCREW FITTING

7ML57262NB12XBB4,X=950MM PROCESS TEMPERATURE: UP TO +150 C (+302 F) POWER SUPPLY: 24 V DC, 5 REV/MIN PROCESS CONNECTION: G 1.5" ((BSPP), EN ISO 228-1) PROCESS PRESSURE: UP TO 5 BAR (72.5 PSI) PROCESS CONNECTION MATERIAL: STAINLESS STEEL 303 (1.4305)

BOARD_CONTROL INVERTER_USI

CUX SMC/FLASHED WITH FIRMWARE, WITHOUT PARAMETERS

7ML56301AC200JB0, REMOTE MOUNT 2M PROCESS CONNECTION R 3/4" ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) 316LSS PROBE LENGTH: EXTENDED ROD, 350 MM (13.78") REMOTE: ELECTRONICS REMOTE MOUNT ELECTRONICS WITH 2 M (79") OF CABLE,BRACKET INCLUDED WETTED SEA

THERMISTOR, DPM V3, NORMAL