PLCs Y CONTROLADORES

POWER ENTRY CONTROL MODULE, DC (PECM-DC)

7ML13014AA2XXAB0,XX=AEGIS PF128 O-RINGS MODEL: COAXIAL, OVERFILL/ FLOODED CAGE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNNECTION PROBE INSERTION LENGTH: Y01 = 163CM O-RINGS:X = AEGIS PF 128 O-RINGS PROCESS CONNECTION:

7ML52212DA18-300FT CABLE, POTTED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY ESTIMATE PREVIOUSLY PROVIDED BY THE CEG TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER.

7ML56506JX100JB0,X=1325MM, C11,Y15 PROCESS CONNECTION: DN100 PN16,WELDED FLANGE, 316LSS, TYPE A FLAT FACED PROBE LENGTH: = 1325MM, EXTENDED ROD LENGTH THERMAL ISOLATOR: WITH THERMAL ISOLATOR FOR PROCESS CONNECTION TEMP. OVER +85C WETTED SEALS: FKM

7ML55150AD04XAA1,X=SS ENCL., Y01=300MM VERSION: Y01 = 300MM, ROD 16MM, PFA INSULATED PROCESS CONNECTION: 2" NPT (TAPER), ANSI/ASME B1.20.1 APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE: = STAINLESS STEEL 2 1/2" NPT, IP68 OPTIONS: NO

7ML55171AC241AA1,CRYOGENIC VERSION: Y01 = 1100MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2" ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 1/2" NPT IP68 OPTIONS: NO

705-530A-111, ECLIPSE TRANSMITTER. HOUSING: ALUMINUM, (2) M20 1.5 CONDUIT CONNECTIONS GP/IS/NI,DIV 1 (FM/CSA) POWER SUPPLY: 9-32 VDC (17 MA MAXIMUM CURRENT DRAW) OUTPUT SIGNAL: PROFIBUS PA TRANSMITTER MOUNTING:INTEGRAL

7MR-A110-089 - GUIDED WAVE 7MR-A110-089 - GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE

7ML56031AA141AA0,CRYOGENIC ELECTRONIC TRANSMITTER: MSP2002-1 (330 PF) PROCESS CONNECTION: 2" ASME, 150LB SINGLE PIECE RAISED FACED FLANGE, 316L SS PROBE INSULATION: PFA INSULATION APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6...T1 PROBE/ELECTRODE DIAME

7ML57345AF111FA0, WITH FORK PROTECT, 2000MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3" ASME 150 LBS B16.5 (1.4541/321) EXTENSION LE

7ML57345AF121FA0,WITH FORK PROTECT,2260MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3" ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENG

7ML57345AF121FA0,WITH FORK PROTECT,2520MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3" ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENG

MSI,CUSTOM,BW=1800MM,A=2230MM, 1500LB LOADCELL SIMILAR TO 7MH7122-2CV81-1A CUSTOM MSI WITH SPECIAL IDLER MOUNTING PLATES AND SPECIAL HANGER BRACKETS TO FIT SPECIAL IDLERS AND CONVEYOR SIDERAIL CONFIGURATION 1800MM BELT WIDTH, CLOSE TO 79" BW MSI CO

MSI,CUSTOM,2007MM DYNAMIC BEAM,2248MM STATIC BEAM CUSTOM MSI, EPOXY POWDER COATED MILD STEEL, 2007MM DYNAMIC BEAM AND 2248MM STATIC BEAM, 1500 LBS LOADCELLS, STANDARD DUTY, WITH MWL FLATBAR CALIBRATION WEIGHT BRACKETS, NO HANGER BRACKETS JC26739KE FO

7ML5517XXXX4XAX1,XX=1" 150LB, CRYOGENIC VERSION:X = Y01 = 170MM, 16MM PFA INSULATED ROD Y02 = 50MM PROCESS CONNECTION (316L SS): X = 1" ASME, 150 LB, SINGLE PIECE RFF APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET: = ST

7ML13011AA411XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 320 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE

7ML13011AA311XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE

7ML13011AA311XX0,XX=DN50 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: VITON PROCESS CONNECTION: DN 50 PN40, EN1092-1 FORM E FLANGE

7ML13012AE223XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 200 CM O-RINGS: NONE PROCESS CONNECTION:X = DN80, P

7ML13012AE223XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 165 CM O-RINGS: NONE PROCESS CONNECTION:X = DN80, P

7ML13031AD211XX0,XX=DN50 PN25/40 FORM B1 MODEL: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 200 CM O-RINGS: VITON PROCESS CONNECTION: DN 50, PN 25/40, DIN 2527 F

7ML13031AD411XX0,XX=DN80 PN25/40 FORM B1 MODEL: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 280 CM O-RINGS: VITON PROCESS CONNECTION:DN 80, PN 25/40, DIN 2527 FO

SPAREPART FRONTEND CASSETTE FOR REMOTE VERSION OF FC430 AND CASSETTE FOR FC410 THE SYSTEM FIRMWARE BUNDLE MUST BE STATED IN THE "REMARK" FIELD TO ENSURE COMPATIBILITY OF THE SYSTEM. THE FW REVISION IS FOUND ON THE PRODUCT LABEL FOR FC430 AND FC410. F

7ML54260BX100AA0,1000MM WAVEGUIDE PURGED PROCESS CONNECTION: 4"/100 MM ANTENNA: 4" HORN ANTENNA, FITS 100 MM OR 4" NOZZLES WITH 1000 MM EXTENSION PURGE (SELF CLEANING): CONNECTION PURGE CONNECTION OUTPUT / COMMUNICATION: 4 TO 20 MA, HART POWER SUPPLY