PLCs Y CONTROLADORES · OMRON

ANALOG OUTPUT UNIT, OUTPUT 4 POINTS, OUTPUT SIGNAL01 TO 5 V/0 TO 5 V/0 TO 10 V/-10 TO 10 V/4 TO 20 MA, 21-POINT DETACHABLE TERMINAL BLOCK (M3 SCREWS)

ANALOG OUTPUT UNIT, OUTPUT 8 POINTS, OUTPUT SIGNAL04 TO 20 MA, 21-POINT DETACHABLE TERMINAL BLOCK (M3 SCREWS)

8 ANALOG OUT, 12 BITS, CAN BE SWITCHED: -10 / + 10 V, 0-10 V, 0-5 V, 1-5 V WITH CONNECTION SCREW

MASTER OR SLAVE COMPOBUS / D (DEVICENET) TBV CS1. IN FACTORY DEFAULT MAXIMUM 3 UNITS WITH ALL SLAVES 63, 64 INPUT AND OUTPUT 64 WORDS PER UNIT. CONFIGURATOR WITH MAXIMUM 16 UNITS WITH ALL SLAVES 63, 1000 AND 1000 IN OUTPUT WORDS PER UNIT.

MASTER OR SLAVE DEVICENET. IN FACTORY DEFAULT MAX. 3 UNITS WITH ALL SLAVES 63, 64 INPUT AND OUTPUT 64 WORDS PER UNIT. CONFIGURATOR WITH MAX. 16 UNITS WITH ALL SLAVES 63, 1000 AND 1000 IN OUTPUT WORDS MAX.

IP ETHERNET MODULE

ETHERNET MODULE TBV CS1 PLC WITH TCP / IP, UDP / IP, FTP AND EMAIL CAPABILITIES

ETHERNET MODULE TBV CS1 PLC WITH TCP / IP, UDP / IP, FTP, DHCP AND EMAIL CAPABILITIES, 10BASE-T, 100BASE-TX CONNECTION

CS1 GENERAL PURPOSE INTERFACE UNIT (GPIB)

I / O UNIT WITH OWN CPU, 4KB FLASH MEMORY AND DATA MEMORIES 6 KW, 12 IN NPN / PNP 24 VDC AND 8 OF TRANSISTOR NPN 300 MA 24 V DC, 2 HIGH-SPEED COUNTER INPUTS AND 200 KHZ AND 2 ANALOG OUTPUTS

I / O UNIT WITH OWN CPU, 4KB FLASH MEMORY AND 6 KW DATA MEMORIES, 12 IN NPN / PNP 24 VDC AND 8 OF NPN TRANSISTOR 300 MA 24 V DC, 2 HIGH-SPEED COUNTER INPUTS AND 200 KHZ AND 2 PULSE OUTPUT TO 200 KHZ

I / O CONTROL UNIT SETTING TBV EXPANSION UNITS DISTANCE (TO 50 M), USING ICM CS1W-II102 CVM1 AND I / O BUS CABLE EXTENSION

32 IN NPN / PNP 24VDC SWITCH DELAY ADJUSTMENTS, WITH 40 POINT FUJITSU CONNECTOR

64 IN NPN / PNP 24 VDC ADJUSTABLE DELAY SWITCH WITH 2 40 FUJITSU POINT CONNECTOR

96 IN NPN / PNP, 24 VDC WITH SOLDEERCONNECTOR WITH 2 56 FUJITSU POINT ONNECTOR

16 IN, NPN / PNP 24 VDC LATCH MODE 0.1 MS PULSE WIDTH DETECTION

I / O INTERFACE UNIT SETTING TBV EXPANSION UNITS DISTANCE (TO 50 M)

INTERRUPT MODULE 16 IN, 24 VDC, ONLY IN CONJUNCTION WITH CS1 CPU CPU'S ON THE RACK, MAX 2 MODULES

ADVANCED CONTROL PROCESS UNIT, UP TO 32 CONTROL CIRCUITS

ADVANCED PROCESS CONTROL BOARD ASSEMBLY IN CPU UP TO 50 FUNCTION BLOCKS

ADVANCED PROCESS CONTROL BOARD ASSEMBLY IN CPU UP TO 500 FUNCTION BLOCKS

ADVANCED PROCESS CONTROL BOARD ASSEMBLY IN CPU FUNCTION UP TO 500 BLOCKS OF GRADIENTCONTROL PROVIDED

ANALOG INPUT/OUTPUT UNIT, INPUT 4 POINTS OUTPUT 4 POINTS, INPUT SIGNAL01 TO 5 V/0 TO 5 V/0 TO 10 V/-10 TO 10 V/4 TO 20 MA, OUTPUT SIGNAL01 TO 5 V/0 TO 10 V/0 TO 5 V/-10 TO 10 V, 1/4000 (FULL SCALE), 21-POINT DETACHABLE TERMINAL BLOCK (M3 SCREWS)

2-AXLE MOTION CONTROLLER WITH G-LANGUAGE FOR CONTROL FROM CS1 PLC'S, ANALOG OUT, PLEASE NOTE: THREE COUNTS AS SPECIAL I / O MODULES